Ask a Question

Setting the Image-Recording Quality

Article ID: ART136131 | Date published: 05/13/2015 | Date last updated: 11/04/2015
 

Description

Setting the Image-Recording Quality

Solution

Setting the Image-Recording Quality

You can select the pixel count and the image quality. There are eight

JPEG image-recording quality settings: . There are three RAW image quality settings:

1 Select [Image quality].

  • Under the [] tab, select [Image quality], then press <>.

2 Select the image-recording quality.

  • To select a RAW setting, turn the <> dial. To select a JPEG setting, turn the <> dial.

  • On the upper right, the “**M (megapixels) **** x ****” number indicates the recorded pixel count, and [***] is the number of possible shots (displayed up to 9999).

  • Press <> to set it.
  • Under [: Record func+card/ folder sel.], if [Record func.] is set to [separately], turn the <> dial to select <> or <>, then press <>.

On the screen that appears, turn the <> dial to select the image recording quality, then press <>

  • If [–] is set for RAW and JPEG,  will be set.

  • The number of possible shots will be displayed up to 1999 on the LCD panel.

 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments