Changing the Scan Settings (Fax) This section describes how to change the following scan settings to send a fax.
Resolution
Specify the resolution.
Higher resolutions result in better image quality but require longer transmission times.
<200 x 100 dpi (Normal)> | For faxes that contain text |
<200 x 200 dpi (Fine)> | For faxes that contain fine text |
<200 x 200 dpi (Photo)> | For faxes that contain photographs |
<200 x 400 dpi (Superfine)> | Achieves an even finer resolution than (Fine) |
<400 x 400 dpi (Ultrafine)> | Achieves an even finer resolution than (Superfine) |
Density
Specify the density.
[
] | Decrease the density. |
[
] | Increase the density. |
2-Sided Original
Set the scan settings for 2-sided original documents.
<Off> | The direction of 2-sided original documents are not set. |
<Book Type> | Select this setting if the top and bottom of the images are the same on pages. |
<Calendar Type> | Select this setting if the top and bottom of the images on each page are opposite each other. |
Sharpness
Adjust this setting to emphasize the outline of the image or decrease the contrast.
[
] | To clearly capture halftone photos, adjust this setting to the appropriate level on the <-> scale.
This can counteract the effect of moire patterns (uneven gradation and striped patterns).
|
[
] | To clearly capture text or lines, adjust this setting to the appropriate level on the <+> scale.
It is best suited for scanning blueprints and very weak pencil manuscripts.
|
Changing the Default Fax Settings The default settings are a set of standard settings predetermined by the machine. These settings become effective when the machine is turned ON and OFF, or when [
] (Reset) is pressed to revert to the default settings.
You can change the following default settings based on your needs.
- Resolution
- Density
- 2-Sided Original
- Sharpness
1. Press [
] (Menu).
2. Select <Fax Settings> using [
] or [
] and press [OK].
3. Select <TX Function Settings> using [
] or [
] and press [OK].
4. Select <Change Defaults> using [
] or [
] and press [OK].
5. Select the item using [
] or [
] and press [OK].
Resolution/Density/Sharpness
For more information, see "Changing the Scan Settings (Fax)."
6. Select <Apply> using [
] or [
] after you have specified the setting and press [OK].
7. Press [
] (Menu) to close the menu screen.
|