Preparing to Print

The direct printing procedure can be performed entirely with the camera while you look at the LCD monitor.

Connecting the Camera to a Printer

	1 Set the camera’s power switch to <OFF>. 2 Set up the printer. For details, refer to the printer’s instruction manual.
	3 Connecting the camera to the printer. Use the interface cable provided with the camera. Connect the cable to the camera’s <DIGITAL> terminal with the cable plug’s <> icon facing the front of the camera. To connect to the printer, refer to the printer’s instruction manual.     4 Turn on the printer.
	5 Set the camera’s power switch to <ON>. Some printers may make a beeping sound.
	6 Play back the image. Press the <> button. The image will appear, and the <> icon will appear on the upper left to indicate that the camera is connected to a printer.

• Movies cannot be printed.

• The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct.

• Do not use any interface cable other than the one provided.

• If there is a long beeping sound in step 5, it indicates a problem with the printer. Resolve the problem displayed by the error message

• Printing is not possible in the HDR mode.

• You can also print RAW images taken with this camera.

• If you use a battery pack to power the camera, make sure it is fully charged. With a fully-charged battery, printing up to approx. 4 hours is possible.

• Before disconnecting the cable, first turn off the camera and printer. Hold the plug (not the cord) to pull out the cable.

• For direct printing, using AC Adapter Kit ACK-E6 (sold separately) to power the camera is recommended