Video Input - Aspect Setting (For LV-7292A, LV-7297A, LV-7392A, LV-7292M, LV-7297M)
Article ID: ART136316 | Date published: 05/13/2015 | Date last updated: 09/02/2015
 

Description

Video Input - Aspect Setting (For LV-7292A, LV-7297A, LV-7392A, LV-7292M, LV-7297M)

Solution

Video Input - Aspect Setting (For LV-7292A, LV-7297A, LV-7392A, LV-7292M, LV-7297M)

This projector has the picture screen resize function, which enables you to customize the image size.

Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Aspect and then press the Point or the OK button.

Use the Point buttons select the desired item and then press the OK button.

Normal

Provide the image to fit the screen size while maintaining the aspect ratio of the input signal.

Full

Provide the full screen image.

16:9

Provide the image at the 16:9 wide screen ratio.

Zoom

Pan the horizontal direction of the image and cut the vertical direction of the image to fit the screen size (16:9). Only for 4:3 video aspect ratio signals.

Custom

Provide the last stored aspect screen image.

Custom adj.

Adjust the screen scale and position manually with this function.

Press the Point button at Custom adj. and the Custom adjustment menu is displayed on the screen, you can use the Point buttons to choose the item you want to adjust.

Scale H/V ....... Adjust the Horizontal/Vertical screen scale.

H&V ................ When set to On, the aspect ratio is fixed. The Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio.

Position H/V ... Adjust the Horizontal/Vertical screen position.

Common ........ Save the adjusted scale or position to all the inputs. Press the OK button at Common to display a confirmation box. To save the scale or position, press the OK button at Yes. When Custom is selected, the saved scale or position is used.

Reset .............. Reset the all adjusted values. Press the OK button at Reset to display a confirmation box. To reset, press the OK button at Yes.

 

Keystone

This function is used to adjust keystone distortion of the projected image. Use the Point buttons to choose the item you want to adjust.

Keystone

To correct keystone distortion, press the OK button. Keystone appears on the screen. Use the Point buttons to correct keystone distortion

Store

To store or reset the keystone correction, press the Point button.

Keep the keystone correction even when the AC power cord is plugged out or turned off the projector.

Reset ........... Release the keystone correction when the AC power cord is plugged out.

Ceiling  

When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Reset

To reset the adjusted data, select Reset and press the

OK button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.

Note:

  • When no signal is detected, Normal is set automatically and the Aspect adjustment menu disappears.
  • The adjustable range for Scale H/V and Position H/V is limited depending on the input signal