IMPORTANT

• [Servo AF] is set to [On].
• Tracking may not be possible when subjects are too small or move toorapidly, or when subject color or brightness matches that of the background too closely.

• [AF-Point Zoom] on the [Shooting] () tab is not available.
• [Macro] ()is not available.
• The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] ().

2. Press the <> button.

Operate the <directional button> to select the [Shooting] () tab.

Operate the <directional button> to set [AF Frame] to [Tracking AF].

After making these settings, press the <> button.

Point the camera so that the () is on the subject, and then press the left <directional button> (When using the PowerShot SX50 HS or PowerShot G15, press the [AF Frame Selector] ()).

- The camera will beep and () will appear when a subject is detected. The camera will continue to track the subject within a certain range even if the subject moves.

- If the camera does not detect the subject, () will appear on the screen.

REFERENCE

• To cancel tracking, press the left <directional button> again( When using the PowerShot SX50 HS or PowerShot G15, press the [AF Frame Selector] ()).
• The camera will detect a subject even if you press the <shutter button> halfway without pressing the left <directional button>( When using the PowerShot SX50 HS or PowerShot G15, without pressing the [AF Frame Selector] ()). After shooting, () will appear in the center of the screen.

Press the shutter button halfway. () will change into a blue () which will follow the subject while the camera continues to adjust the focus and exposure.

- Even after shooting completes, () will appear, and the camera will continue to track the subject.

^{... Tracking AF can be set}

^{... Setting is not possible; however, press the upper to use Tracking AF}

^{... Shooting mode is not available on this model}

Model

Shooting Modes

, , , , , , , ,

PowerShot SX500 IS / SX160 IS

PowerShot SX50 HS

PowerShot G15