How to perform the wireless setup using a USB cable (Mac OS X)
Article ID: ART136647 | | | Date published: 05/13/2015 | | | Date last updated: 11/04/2015 |
Description
How to perform the wireless setup using a USB cable (Mac OS X)
Solution
How to perform the wireless setup using a USB cable (Mac OS X) ID
:
8201618900
_
EN
_
1
|
|
Solution |
Read Me First - Before performing the wireless setup
Regarding the preparations and the procedures for using the printer in a wireless connection, refer to [ The necessary environment and the procedures for using the printer in a wireless connection ].
Perform the setup using a USB cable
In most cases, "Wireless Setup Using the USB cable" will be used to connect the machine to your access point or router. Before you continue, you must gather the following information which will be required during the installation.
Refer to the instruction manual for the access point or the router you are using, or you may contact each manufacturer for help.
- Access Point Name/Network Name
* Also referred to as SSID.
An identifier to identify the specific access point.
- Network Key
* Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.
A password to prevent unauthorized access to the network.
Screens are based on Mac OS X v.10.7. Actual screens may differ depending on the OS version.
1. Insert the CD-ROM into the computer.
![]()
2. Double-click the [Setup] icon in the CD-ROM folder, then click [Download] in the subsequent window.
![]()
3. When the download is complete, the screen below is displayed. Click [Next].
![]()
4. In the subsequent screen, enter the administrator name and password. Then click [OK].
![]()
5. Click Next.
![]()
6. Click Wireless Connection.
![]()
7. Click Connect to the network.
![]()
Follow the instruction and go to step 8.
8. Click Wireless Setup Using the USB cable.
![]() Install the Software (Information) Lets perform the software installation.
1. Click Next.
![]()
2. Click Add Printer.
![]()
3. Select Canon xxx series Canon IJ Network and click Add.
![]()
4. Click Next.
![]()
5. Click Next.
![]()
- Important Information for the Installation
![]() If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed.
(This has no effect on the machine's functionality.)
![]() Test printing will be performed to check the printer's operation.
Load plain paper into the printer and click [Execute].
After test printin, click [Next].
To skip test printing, click [Next] instead of [Execute].
6. Click Exit to complete the installation.
Remove the Setup CD-ROM and keep it in a safe place.
![]()
7. Quick Menu starts.
![]()
The end of the procedure of the wireless LAN setup.
|
SIMS Doc Id
8201618900