Note: The steps listed below are specific to the MP990.  For instructions for other models, click here

You can print out the network settings of the machine such as its IP address and SSID.

• This print out contains valuable information about your computer. Handle it with care.

  1. Make sure that the machine is turned on.

  2. Load a sheet of A4 or Letter-sized plain paper in the Cassette.

  3. Select Settings on the HOME screen, then press the OK button.

  4. Select Device settings, then press the OK button.

  5. Select LAN settings, then press the OK button.

  6. Select Confirm LAN settings, then press the OK button.

  7. Select Print LAN details, then press the OK button.

  8. Select Yes, then press the OK button.

     The following information on the machine's network setting is printed out.

     Item	Explanations of the item	Setting
     Wireless LAN	Wireless LAN	Enable/Disable
     Link Status	Status of the Wireless LAN	Active/Inactive
     MAC Address	MAC Address	XX:XX:XX:XX:XX:XX
     SSID	SSID	SSID of the wireless LAN
     Connection Mode	Connection Mode	Infrastructure
     Channel	Channel	XX (1 to 13)
     Encryption	Method of the Encryption	none/WEP/TKIP/AES
     WEP Key Length	WEP Key Length	Inactive/128/64
     Authentication	Method of the Authentication	auto/open/shared/WPA-PSK/WPA2-PSK
     Signal Strength	Signal Strength	0 to 100 [%]
     TCP/IP Version	TCP/IP Version	IPv4/IPv6
     IP Address	Selected IP Address	XXX.XXX.XXX.XXX
     Default Gateway	Default Gateway	XXX.XXX.XXX.XXX
     Subnet Mask*1	Subnet Mask	XXX.XXX.XXX.XXX
     Subnet Prefix Length*2	Subnet Prefix Length	XXX
     IPsec*3	IPsec setting	Active
     Security Protocol*3	Method of the Security Protocol	ESP/ESP & AH/AH
     Wired LAN	Wired LAN	Enable/Disable
     Link Status	Status of the Wired LAN	Active/Inactive
     MAC Address	MAC Address	XX:XX:XX:XX:XX:XX
     TCP/IP Version	TCP/IP Version	IPv4/IPv6
     IP Address	IP Address	XXX.XXX.XXX.XXX
     Default Gateway	Default Gateway	XXX.XXX.XXX.XXX
     Subnet Mask*1	Subnet Mask	XXX.XXX.XXX.XXX
     Subnet Prefix Length*2	Subnet Prefix Length	XXX
     IPsec*3	IPsec setting	Active
     Security Protocol*3	Method of the Security Protocol	ESP/ESP & AH/AH
     Printer Name	Printer name	Printer name (Up to 15 characters)
     Shared Memory Card	Memory card sharing	Enable/Disable
     WSD	WSD setting	Enable/Disable
     WSD Timeout	Timeout	1/5/10/15/20 [min]
     LLTD	LLTD setting	Enable/Disable
     LPR Protocol	LPR protocol setting	Enable/Disable
     Bonjour	Bonjour setting	Enable/Disable
     Bonjour Service Name	Bonjour service name	Bonjour service name (Up to 52 characters)
     Bonjour LPR Service	Bonjour LPR service advertising	Enable/Disable

     ("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)

     *1 Only when IPv4 is selected on IPv4/IPv6 settings, the status of the network is printed.

     *2 Only when IPv6 is selected on IPv4/IPv6 settings, the status of the network is printed.

     *3 Only when IPv6 is selected on IPv4/IPv6 settings and Active is selected on IPsec Settings, the status of the network is printed.