Setting the Flash (Flash On) (PowerShot SX500 IS / SX160 IS)
| Article ID: ART136782 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 08/15/2015 |
Description
Setting the Flash (Flash On) (PowerShot SX500 IS / SX160 IS)
Solution
| Setting the Flash (Flash On) (PowerShot SX500 IS / SX160 IS) ID : 8201595100 _ EN _ 1 |
| Solution | When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash. IMPORTANT - The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] (
 ). - In the following shooting modes, you cannot set the [Flash] to the On setting to make it fire every time you shoot.
- [AUTO] (  ),[Low Light] (  ), [Fireworks] (  ),[Discreet Mode] (  ), [Movie] (  ) - The position and shape of the operation buttons, images displayed, and setting items may differ depending on the model you are using.
1. Press the <Power> button on the camera.
2.Lift the flash.(PowerShot SX500 IS) Raise the flash. Press the <Flash up> button (  ). (PowerShot SX160 IS)
3. Press the <Flash> button ( ).
4. The following screen will appear in the LCD screen.
  Operate the <directional buttons> to select the [Flash On] (  ).  Make sure to select [On].
5. If the following icon is displayed on the monitor, this completes the setting process.
|
