Use the Point buttons to select the desired item and then press the OK button .

Normal -

Full -

16:9 -

Zoom -

True -

Custom -

Custom adj. -

Scale H/V....... Adjust the Horizontal/Vertical screen scale.

When set to On, the aspect ratio is fixed. The Scale V appears dimmed and becomes unavailable. Adjust Scale H, then the screen scale is automatically modified based on the aspect ratio.

Position H/V... Adjust the Horizontal/Vertical screen position.

Common ........ Save the adjusted scale or position to all the inputs. Press the OK button at Common to display a confirmation box. To save the scale or position, press the OK button at Yes. When Custom is selected, the saved scale or position is used.

Reset .............. Reset the all adjusted values. Press the OK button at Reset to display a confirmation box. To reset, press the OK button at Yes.

Note:

• This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.

• The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.

• True and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p 575p, 720p,1035i or 1080i is selected in the PC System Menu (p. 31).

• When True is selected in the Screen menu, Digital zoom +/- can not be selected.

Note:

• When no signal is detected, Normal is set automatically .
• The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

Select Digital zoom +. The On-Screen Menu disappears and D. zoom + Press the OK button to expand the image size. Use the Point buttons to pan the image. The Panning function can work only when the image is larger than the screen size. A projected image can be also expanded by pressing the D.ZOOM + or the OK button on the remote control unit.

Digital zoom –

Select Digital zoom –. The On-Screen Menu disappears and D. zoom – Press the OK button to compress image size.

The projected image can be also compressed by pressing the D.ZOOM – or the OK button on the remote control unit.

To exit the Digital zoom +/– mode, press any button except the D.ZOOM +/– buttons, OK and Point buttons.

To return to the previous screen size, select a screen size from the Screen Size Adjustment Menu or select an input source from the Input Source Selection Menu (see page 30) again, or adjust the screen size with the D.ZOOM +/– buttons.

Keystone

This function is used to adjust keystone distortion of the projected image. Use the Point buttons to choose the item you want to adjust

Keystone

To correct keystone distortion, press the OK button. Keystone appears on the screen. Use the Point buttons to correct keystone distortion

Store

To store or reset the keystone correction, press the Point button.

Store ........... Keep the keystone correction even when the AC power cord is plugged out or turned off the projector.

Reset ........... Release the keystone correction when the AC power cord is plugged out.

Ceiling

When this function is set to On, the picture will be top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to On, the picture will be left/right reversed. This function is used to project the image from rear of the screen.

Reset

To reset the adjusted data, select Reset and press the

OK button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures

Note:

• The minimum compression ratio is limited depending on the input signal, when the Keystone function is working or when the custom is selected for the screen size.

• True and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p 575p, 720p,1035i or 1080i is selected in the PC System Menu

• Digital zoom +/- cannot be selected when True is selected.

• The minimum compression ratio is limited at Normal screen size