Setting the Flash (Flash On) (PowerShot SX50 HS)

Article ID: ART136941 | Date published: 05/13/2015 | Date last updated: 11/16/2015


Setting the Flash (Flash On) (PowerShot SX50 HS)


When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash.
  • The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] ().
  • In the following shooting modes, you cannot set the [Flash] to the On setting to make it fire every time you shoot.
- [AUTO] () , [Sports] () , [High-speed Burst HQ] () , [Fireworks] (
) , [High Dynamic Range] () , [Movie] () , [iFrame Movie] () , [Super Slow Motion Movie] ()

1. Press the <Power> button on the camera.

2.Configure the setting.

Lift the flash.

Press the <Flash> button ().

3. The following screen will appear in the LCD screen.

Operate the <directional buttons> to select the [Flash On] ().

Make sure to select [On].

4. If the following icon is displayed on the monitor, this completes the setting process.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments