Remote control unit Operation
Article ID: ART137180 | Date published: 05/13/2015 | Date last updated: 08/15/2015
 

Description

Remote control unit Operation

Solution

Remote control unit Operation

Using the remote control unit for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.

COMPUTER, HDMI, VIDEO, S-VIDEO and

COMPONENT buttons

Press the COMPUTER, HDMI, VIDEO, S-VIDEO and COMPONENT buttons on the remote control unit to select the input source

FREEZE button

Press the FREEZE button on the remote control unit to freeze the picture on the screen, meanwhile, volume is muted. To cancel the Freeze function, press the FREEZE button again or press any other button.

Fig.1 will appear on the screen while the Freeze function is working.

INFO. button

Display the input source information: Input, H-sync freq., V-sync freq., Aspect, Language, Lamp status, Lamp counter, Power management mode, Key lock, PIN code lock, Remote control and SERIAL NO.

D.ZOOM buttons

Press the D.ZOOM buttons on the remote control unit to enter to the Digital zoom +/– mode.

LAMP button

Press the LAMP button on the remote control unit to select the lamp mode for changing the brightness on the screen.

BLANK button

Press the BLANK button on the remote control unit to black out the image. To restore to normal, press the BLANK button again or press any button. When the projected image is captured and is set as User in the Logo selection, the screen changes each time you press the BLANK button as follows.

Note:

When use the MUTE button to release the Blank  function, the mute function can not be operated at  the same time.

P-TIMER button

Press the P-TIMER button on the remote control unit to operate the Count up/Count down function.

To stop the count time, press the P-TIMER button.

To restart the P-timer, press the P-TIMER button again.

To cancel the P-timer function, press and hold the P-TIMER button

IMAGE button

Press the IMAGE button on the remote control unit to select a desired image mode of the screen.

 
ASPECT button

Select the screen size