Using the Self-timer (EOS M)
| Article ID: ART137224 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 08/15/2015 |
Description
Using the Self-timer (EOS M)
Solution
| Using the Self-timer (EOS M) ID : 8201598300 _ EN _ 1 |
| Solution | The self-timer is useful when you want to photograph yourself or prevent camera shake caused when the shutter is released. 1. Set the power to <ON>. 2. Press <  /  > button.
 3. Tap the self-timer.
  : 10-sec. self-timer. The remote controller can also be used.  : 2-sec. self-timer  : 10-sec. self-timer plus continuous shots. Press <Main Dial> to set the number of multiple shots (2 to 10) to be taken with the self-timer. 4. Focus the subject, then press the shutter button completely.
 - You can check the self-timer operation with the self-timer/AF-assist beam, beeper, and countdown display (in seconds) on the LCD monitor.
- Two seconds before the picture is taken, the self-timer/AF-assist beam will light up and the beeper will sound faster.
To cancel the self-timer shooting: Press the < / > button or set the power to <OFF>. (To cancel the self-timer setting, press the < / > button and tap [  ] or [ ].) CAUTION - With [ ], the interval between the multiple shots may be prolonged depending on the shooting functions settings such as the imagerecording quality or flash.
- When you use a Creative Filter and shoot, even if you set the drive mode
- to [ ] (Self-timer: Continuous), single shooting will take effect.
NOTE - After taking self-timer shots, playing back the image to check focus and exposure is recommended.
- When using the self-timer to shoot only yourself, use focus lock on an object at about the same distance as where you will stand.
|
| Related Info | Compatible Remote Switch (EOS M)
|
