If You Cannot Receive a Fax (MF4890dw/MF4880dw/MF4770n Only)
Article ID: ART137297 | | | Date published: 05/13/2015 | | | Date last updated: 08/15/2015 |
Description
If You Cannot Receive a Fax (MF4890dw/MF4880dw/MF4770n Only)
Solution
If You Cannot Receive a Fax (MF4890dw/MF4880dw/MF4770n Only) ID : 8201613300 _ EN _ 1 | |
Solution | Is the Telephone Line Connected or Configured Properly?
Is the machine set to receive faxes automatically? Set the receive mode to one of the following.
If you set the receive mode to <Answering Machine>, ensure that an external telephone with a built-in answering machine is connected to the machine, that it is turned ON, and that an answering message has been recorded. Are documents stored in memory, leaving little or no memory available? If <Memory Lock Settings> in <Communication Management Settings> in <System Settings> of the setting menu is set to <ON>, follow the procedures below to output the documents in memory. Print, send, or delete any documents stored in memory. For instructions on how to check or delete jobs stored in memory, see [ Checking and Deleting Documents in Memory ].
1. Press [ ![]() 2. Press [ ![]() ![]() ![]() ![]() Use the numeric keys to enter the System Manager PIN, and then press [OK]. ![]() 3. Press [ ![]() ![]() ![]() 4. Press [ ![]() ![]() When <Memory Lock PIN> is set, enter the number using the numeric keys and press [OK]. ![]() 5. Press [ ![]() ![]() ![]() Fax documents saved in the memory are combined and printed. 6. Press [ ![]() Has an error occurred during reception?
Is paper loaded in the machine? Make sure paper is loaded in the machine. Slow down the receive speed. The receive start speed is specified 33600 bps in the default setting, however you may not be able to receive a fax depending on the status of the recipient fax machine or the line. Select a slower receive speed using following procedure. 1. Press [ ![]() 2. Press [ ![]() ![]() ![]() ![]() Use the numeric keys to enter the System Manager PIN, and then press [OK]. ![]() 3. Press [ ![]() ![]() ![]() 4. Press [ ![]() ![]() ![]() 5. Press [ ![]() ![]() ![]() 6. Press [ ![]() ![]() ![]() 7. Press [ ![]() The procedure is complete. |
SIMS Doc Id
8201613300