Ask a Question

Printing to a PictBridge Compatible Printer

Article ID: ART137336 | Date published: 05/13/2015 | Date last updated: 10/22/2015
 

Description

Printing to a PictBridge Compatible Printer

Solution

The screen display and setting options will differ depending on the printer.

Some settings may not be available. For details, refer to the rinter’s instruction manual

1 Select the image to be printed.

  • Check that the icon is displayed on the upper left of the LCD monitor.

  • Turn the <> dial to select the image to be printed.

2 Press < >.

  • The print setting screen will appear.

3 Select [Paper settings].

  • Select [Paper settings], then press <>.

    • The paper setting screen will appear.
Setting the Paper Size

  • Select the size of the paper loaded in the printer, then press <>.

    • The paper type screen will appear.
Setting the Paper Type

  • Select the type of the paper loaded in the printer, then press <>.

    • The page layout screen will appear.

 

Setting the Page Layout

  • Select the page layout, then press <>.

    • The print setting screen will reappear

 

4 Set the printing effects.

  • Set if necessary. If you do not need to set any printing effects, go to step 5.

  • What is displayed on the screen differs depending on the printer.

  • Select the option, then press <>.

  • Select the desired printing effect, then press <>.

  • If the icon is highlighted next to <INFO>, you can also adjust the printing effect

5 Set the date and file number imprinting.

  • Set if necessary.

  • Select , then press <>.

  • Set as desired, then press <>.

 

 

6 Set the number of copies.

  • Set if necessary.

  • Select <R>, then press <>.

  • Set the number of copies, then press <>.

 

 

7 Start printing.

  • Select [Print], then press <>.

 

 

When imprinting the shooting information of an image shot at ISO 51200, H1, or H2, the correct ISO speed may not be imprinted.

  • The [Default] setting for printing effects and other options are the printer’s own default settings as set by the printer’s manufacturer. Refer to the printer’s instruction manual to find out what the [Default] settings are.

  • Depending on the image’s file size and image-recording quality, it may take some time for the printing to start after you select [Print].

  • If image tilt correction is applied, it may take longer to print the image.

  • To stop the printing, press <> while [Stop] is displayed, then select [OK].

  • If you execute [: Clear all camera settings], all the settings will revert to their defaults

 

 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments