Connecting to a wireless LAN by setting the IP address

Article ID: ART137518 | Date published: 05/13/2015 | Date last updated: 08/15/2015


Connecting to a wireless LAN by setting the IP address


This section explains how to enter an IP address manually.

In the [Network Setup] process for [Wi-Fi Setup], this is the step that comes after you have connected to the wireless router (access point). Please see the following for information about the steps involved in connecting to the wireless router.

1. Touch [Manual].

2. Touch the field under [IP Address] or [ Subnet Mask ].

Enter the IP address or subnet mask and then touch [OK].
- Please confirm the settings of the wireless router ahead of time when entering this information.

Touch [OK] after making the various settings.

3. Enter the default gateway and then touch [OK].

4. Enter the primary and secondary DNS servers (a progression of four sets of digits) and then touch [OK].

- A screen to test the settings will appear.

5. Save the settings of the connection point.
Touch [Yes] -> [OK] in that order.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments