1. Set the camcorder to playback mode and then press <HOME>.
2. Set up a new connection point.
2-1. Touch [Wi-Fi].
2-2. Touch [Wi-Fi Setup].
2-3. Touch [Network Setup].
3-2. Touch desired connection point (
~
).
3-3. Touch [Set Up New].
REFERENCE
- When changing the set connection point:
1. Touch the number for the connection point you want to change (from
to
), and then touch [Edit].
2. Manually set the items you want to change.
- When deleting a connection point:
1. Touch the number for the connection point you want to delete (from
to
), and then touch [Delete].
2. Touch [Yes].
4. Set up a new connection point, and then connect to the wireless router (access point).
4-1. Touch [Manual Setup].
-The camcorder will automatically detect available nearby Wi-Fi networks and display their SSID.
4-2. Touch
or
to select the desired access point.
4-3. Touch [OK].
- If
appears in the SSID:
i. If the encryption key (password) has not been configured yet, touch [Not configured].
If it has been set, [Password-protected] will appear.
ii. Enter the encryption key or password of the wireless access point and then touch [OK].
- If the encryption method of the wireless access point is set to WEP, the WEP index key will appear on the screen. Select the same index key of the access point.
- If the wireless router (access point) is not found:
i. Touch [Enter Manually].
ii. Touch [SSID].
iii. Enter the access point's SSID and then touch [OK].
Touch [OK] to return to the previous screen.
iv. Touch the [Open - No encryption] authentication/encryption method.
v. Touch any of the authentication methods.
- If you select [Open], you can select [No Encryption] or [WEP]. If you select, [Open] > [WEP] or [Shared Key WEP], you will need to specify the WEP index key.
vi. Touch [Not configured], enter the encryption key (password) to use for the connection, and then touch [OK].
- If you chose [Open] -> [No Encryption] in step v, the operations in step vi are unnecessary.
5. Connect the camcorder to the wireless LAN.
Touch [Automatic] to automatically obtain an IP address.
REFERENCE
Select whether to test the settings.
- You can touch [Check Current Configuration] to review the network settings.
- If you touched [Yes], a test of the settings will be performed and a confirmation screen will appear. Touch [OK].
6. Save the settings of the connection point.
Touch [Yes] -> [OK] in that order.
REFERENCE
- When checking a connection point:
1. Touch [Wi-Fi Setup] -> [Check Current Configuration] in that order.
2. Touch the number for the connection point you want to change (from
to
).
- The details of the settings will appear.
3. Touch either
or
to check the items.
4. Touch
three times.
- The screen will return to the Wi-Fi menu.
7. Touch
.
