How to perform the wireless setup using a USB cable (Windows) - First Time Installs or Installing after a Network or Router Change
Article ID: ART137821 | Date published: 05/13/2015 | Date last updated: 06/09/2017


How to perform the wireless setup using a USB cable (Windows)


Read First

- Before performing the wireless setup
Regarding the preparations and the procedures for using the printer in a wireless connection, refer to [ The necessary environment and the procedures for using the printer in a wireless connection ].

If you do not have an optical drive on your PC or if you have misplaced your CD

Windows XP / Vista / 7 / 8 / 8.1 Users:

Click here (MG3220) or here (MG3222) and download the Mini Master Setup for your printer.  After launching the Mini Master Setup, follow the directions in this document.  The Mini Master Setup contains the MP Drivers and the IJ Network Tool only, so in order to install the applications that come with this printer, you will need to obtain the software under the Software tab on your printer's support page.

Windows 10 Users:

Click here (MG3220) or here (MG3222) and download the MP Drivers for your printer.  The installation procedure differs from the Mini Master Setup and CD-ROM installation procedure.  Follow any on-screen instructions to set up the wireless connection for your printer.


Perform the setup using a USB cable.

  • First, confirm the information necessary for performing the wireless LAN setup using a USB cable.
In most cases, "Wireless Setup Using the USB cable" will be used to connect the machine to your access point or router. Before you continue, you must gather the following information which will be required during the installation.
Refer to the instruction manual for the access point or the router you are using, or you may contact each manufacturer for help.



- Access Point Name/Network Name
* Also referred to as SSID.
An identifier to identify the specific access point.



- Network Key
* Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.
A password to prevent unauthorized access to the network.



  • Quit all applications before installation.
  • Log on using an administrator account.
  • Internet connection may be required during the installation. Connection fees apply.



Screens are based on Windows 7 operating system Home Premium. Actual screens may differ depending on the OS version.



1. Insert the CD-ROM into the computer.

If the USB cable is already connected, unplug it. If a message appears on the computer, click Cancel.



2. Click Run Msetup4.exe on the AutoPlay screen, then click Yes or Continue on the User Account Control dialog box.
If the User Account Control dialog box reappears in following steps, click Yes or Continue.

If the CD-ROM does not autorun:
Double-click (My) Computer -> CDROM icon -> MSETUP4.EXE.



3. Click Next.



4. Click Wireless Connection.



5. Click Connect to the network.



Follow the instruction and go to step 6.
If an error message is displayed, see "Troubleshooting" at the right.



6. Click Wireless Setup Using the USB cable.



When the .NET Framework screen appears, click [Yes].


Install the Software (Information)

Let's perform the software installation.



1. Click Next.

  • Easy-WebPrint EX
Easy-WebPrint EX is Web print software that is installed on the computer when installing the supplied software. Internet Explorer 7 or later (Windows) is required to use this software. An Internet connection is required for installation.



Follow any on-screen instructions to proceed with the software installation.
  • If the Detected Access Points List screen appears
Select the access point for printer to connect to, and click Connect.

When Connect is grayed out, the access point you selected may be encrypted.

To connect to this access point, enter the network key and then click Connect.



2. When the Setup Completion dialog box appears, click Complete.



3. Click Next.



- Important Information for the Installation



  • If the Extended Survey Program screen appears

If you can agree to Extended Survey Program, click Agree.
If you click Do not agree, the Extended Survey Program will not be installed.
(This has no effect on the machine's functionality.)



  • When the [Test Print] window is displayed

Test printing will be performed to check the printer's operation.
Load plain paper into the printer and click [Execute].
After test printin, click [Next].
To skip test printing, click [Next] instead of [Execute].



4. Click Exit to complete the installation.
Remove the Setup CD-ROM and keep it in a safe place.



5. Quick Menu starts.



The end of the procedure of the wireless LAN setup.