Printing Out Network Setting Information

You can print out the network settings of the machine such as its IP address and SSID.
 

Note: The steps listed below are specific to the MX350 and MX870 printers.  For instructions for other models, click here

1. Make sure that the machine is turned on. Load a sheet of A4 or Letter-sized plain paper.
    

2. Press the Setup button.
    

3. Select Device settings, then press the OK button.

4.  

4. Use the button to select LAN settings, then press the OK button.

5.  

5. Use the button to select Confirm LAN settings, then press the OK button.

6.  

6. Use the button to select Print LAN details, then press the OK button to confirm the selection.
    

7. Use the button to select Yes, then press the OK button to start printing.
   
   The machine starts printing the network setting information.

   The following information on the machine's network (WLAN or LAN) settings is printed out.

   
   WLAN setting list

    

   Items	Setting (IPv4)	Setting (IPv6)
   Link Status	Active/Inactive	Active/Inactive
   SSID	XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX	XXXXXXXXXXXXXXXX XXXXXXXXXXXXXXXX
   Communication mode	Infrastructure	Infrastructure
   Channel	XX	XX
   Wireless LAN security	Disable/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)	Disable/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)
   IP address	XXX. XXX. XXX. XXX	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX
   Subnet mask	XXX. XXX. XXX. XXX	-
   Subnet prefix length	-	XXX
   Default gateway	XXX. XXX. XXX. XXX	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX
   MAC address	XX:XX:XX:XX:XX:XX	XX:XX:XX:XX:XX:XX
   IPsec settings	-	Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
   Pre-shared key	-	XXXXXXXXXXX
   Printer name	XXXXXXXXXXXXXXX	XXXXXXXXXXXXXXX
   Bonjour service name	Canon MX870 series _XXXXXXXXXXXX, or Canon MX350 series _XXXXXXXXXXXX	Canon MX870 series _XXXXXXXXXXXX , or Canon MX350 series _XXXXXXXXXXXX

   
   
   LAN setting list
    

   Items	Setting (IPv4)	Setting (IPv6)
   Link Status	Active/Inactive	Active/Inactive
   IP address	XXX. XXX. XXX. XXX	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX
   Subnet mask	XXX. XXX. XXX. XXX	-
   Subnet prefix length	-	XXX
   Default gateway	XXX. XXX. XXX. XXX	XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX: XXXX
   MAC address	XX:XX:XX:XX:XX:XX	XX:XX:XX:XX:XX:XX
   IPsec settings	-	Enable (ESP)/Enable (ESP & AH)/Enable (AH)/Disable
   Pre-shared key	-	XXXXXXXXXXX
   Printer name	XXXXXXXXXXXXXXX	XXXXXXXXXXXXXXX
   Bonjour service name	Canon MX870 series _XXXXXXXXXXXX or Canon MX350 series _XXXXXXXXXXXX	Canon MX870 series _XXXXXXXXXXXX Canon MX350 series _XXXXXXXXXXXX

Page top