If black streaks appear with printing, the fuser roller in the main unit may be dirty. Should this occur, clean the fuser roller in the following procedure. The roller should also be cleaned each time the toner cartridge is replaced. Load a sheet of blank LTR paper into the multi-purpose tray and start cleaning.

Note:

• Use standard paper as the cleaning paper.
• Cleaning the roller takes approximately 130 seconds.
• When some jobs are stored in memory, this function is not available.

1. Press [Menu].

2. Press [] or [] to select <ADJUST./CLEANING>, then press [OK].

3. Load a sheet of blank LTR paper in the multi-purpose tray.

4. Press [] or [] to select <FIX. UNIT CLEANING>, then press [OK].

Cleaning starts.

Throw away the cleaning paper after use.