Using CapturePerfect 3.1
This section describes how to start CapturePerfect 3.1 and scan documents. The procedure for using the Scan Batch to File function is described here as an example.
- From the Windows task bar, click [Start] -> click [All Programs] -> [CapturePerfect 3.1] -> [CapturePerfect 3.1].
In Windows 8, CapturePerfect is saved to the following location.
CapturePerfect 3.1 starts.
- From the [Scan] menu, select [Select Scanner].
The [Select Scanner] dialog box opens.
- Select [CANON DR-XXXX] and click [Settings].
(XXXX varies depending on the model you are using)
If [CANON DR-XXXX] is not displayed in the list of scanners, you must re-install the ISIS/TWAIN driver.
- Select the default page size and click [OK].
If you select [Default] in the ISIS driver properties dialog box, that setting is applied here.
- Click [OK] to finish scanner selection.
- From the [Scan] menu, select [Scanner Settings].
The Properties dialog box for the ISIS driver opens.
- Set the scan settings.
For more information on specifying the scan settings, see "ISIS/TWAIN Driver Settings Dialog Box".
- From the [Scan] menu, click on [Scan Batch to File].
The [Scan Batch to File] dialog box opens.
- Specify the file name and the file type for saving the image data.
- Place your document and click [Save] to start scanning.
You must load your documents as described below, depending on the specified Feed Option setting.
- If the [Standard Feeding] Feed Option is enabled, load your documents before scanning. When all of the documents have been scanned, the Continue Scanning dialog box appears.
- If the [Manual Feeding] Feed Option is enabled, the Separation Off key is lit and the Document Feed Tray is raised. You must insert one page at a time to be scanned, and press the Stop key to display the Continue Scanning dialog box.
- If a Feed Option other than [Standard Feeding] or [Manual Feeding] is selected, once you have started scanning, each document placed in the Document Feed Tray is scanned, and when no document is loaded, the scanner enters the standby state.
- If the [Automatic Feeding] Feed Option is enabled, scanning is performed automatically whenever a sensor in the Document Feed Tray detects a loaded document, and pressing the Stop key causes the Continue Scanning dialog box to appear.
- If the [Panel-Feeding] Feed Option is enabled, the Start key lamp is lit. You must load a document and press the Start key to scan Pressing the Stop key causes the Continue Scanning dialog box to appear.
- Verify that a document is loaded and click either [Continue Scanning] or [Stop Scanning].
- When scanning is complete, select [Exit] from the [File] menu to quit CapturePerfect 3.1.