Adjusting the Document Guides

The document guides normally extend at equal distances to the left and right ends from the center of the feeder so that documents are by default to be placed at the center of the feeder inlet.
However, each document guide has its own lock lever, so you can place documents either toward the left or right side of the feeder inlet by locking the document guides at the appropriate positions.
 

Loading Documents at the Left Side

This example shows the procedure for loading documents at the left side of the feeder.

1. Spread the document guides all the way to the left and right.
    
   
   
2. Load your documents against the left feed guide.
    
   
   
3. Lock the left document guide (1) by pulling out the lock lever, then slide the right document guide to the right edge of your documents (2).
    
   
   
4. Lock the right document guide (1), and unlock the left document guide (2).
    
   
   
5. Slide the left document guide to the left edge of your documents.
    

Resetting the Document Guides

To reset the guides so that they are equidistant from the center , perform the following procedure to spread the guides to the left and right as far as they will go.

1. Confirm that the right document guide is locked (1), and slide the left guide all the way to the left (2).
    
   
   
2. Lock the left document guide (1), and unlock the right document guide (2).
    
   
   
3. Slide the right document guide all the way to the right.
    
   
   
4. Unlock the left document guide.