Before scanning, prepare the Document Feed and Eject Trays for the desired paper size.
Solution
Document Feed and Eject Trays
Before scanning, prepare the Document Feed and Eject Trays for the desired paper size.
Preparing the Document Feed Tray
Document Feed Tray The height of the Document Feed Tray can be adjusted according to the number of document pages to be loaded (the default setting is the lowest position).
Tray Position Setting The proper height of the Document Feed Tray can be set in advance by the Tray Position in the User Mode setting, which minimizes the time required to start feeding the documents to be placed on the Document Feed Tray.
Press the Menu key on the control panel.
The User Mode is activated.
Press the key five times to display Tray Position.
Confirm your settings. [0]: To load up to 500 sheets [1]: To load up to 300 sheets [2]: To load up to 100 sheets
Press [Enter].
The current setting is indicated by blinking square brackets [ ] .
Select with the or key and press [Enter] to accept the selection. The Document Feed Tray moves to the selected height.
Press the Stop key to exit the User Mode.
Document Guides Slide the document guides to fit the width of your document.
The positions of the left and right document guides can also be locked independently for off-center loading.
Document Feeder Tray Extension / Extension Wire Pull out the tray extension as needed for the length of your document.
Gently open the extension wire.
Use the extension wire if the document is beyond the edge of the document tray extension.