Preset Setting Tool - Display Screen
Preset Setting Tool has two display screens, the [Preset] tab and the [Preset Tour] tab.
With the [Preset] tab, up to 20 presets and the home position are set while referring to the panorama screen or full image.
With the [Preset Tour] tab, Preset Tour is set whereby the camera tours and monitors multiple presets.
The following explains the [Preset] tab display screen.
(1) Image Display Area - The image currently captured by the camera is shown. Pan, tilt, and zoom operations are the same as in the VB-H41/610/710 Viewer. For details, see “How to Operate the Viewer”
(2) [Switch Mouse Operation] button - Click the button to switch to 
. In this mode, move the mouse pointer to the image display area and click to operate the pan and tilt. Click the button again to return to 
.
(3) [Switch Screen Size] button - Each time this button is clicked, the screen size of the image display area switches between “480 x 270” and “960 x 540”.
(4) [Obtain/Release Camera Control] button - This button is used to obtain/release the camera control privileges. For details, see “Obtaining Camera Control Privileges”
(5) [Control for Admin] button - Displays the Control for Admin Panel
(6) 
[Panorama Screen] - The panorama image registered in the camera is shown. A preset preview frame (yellow) reflecting the preset settings is shown, where you can drag to resize or move the frame and reflect the new frame in the preset settings. Also, if view restrictions are set, those areas are shown in a blue frame.
(7) [Preset] tab, [Preset Tour] tab - Switch between the preset setting tab and preset tour setting tab.
(8) [Preset/Home Position] selection box - Select the preset (from 1 to 20) or [home position] you want to set.
(9) [Quick Registration] - Load the current camera position, and register them as preset settings.
(10)[Preset Name] - You can enter a preset name of up to 64 characters. You can set a name in alphanumeric characters. Be sure to enter a single-byte alphanumeric preset name. When the [Home Position] is selected in (8), the preset name function is grayed out. In a [Preset Name], ASCII characters (spaces or printable characters) can be used.
(11) [Detailed Settings] - Show the detailed settings.
(11)-1 [Show in viewers] checkbox - Select this checkbox to use presets in the viewer. When the [Home Position] is selected in (8), this function is grayed out.
(11)-2 Camera Parameter - Enter the center angle of the desired angle in [Pan] and [Tilt]. In [Zoom], enter the view angle.
[Pan] ..... Set the pan position of the camera.
[Tilt] ....... Set the tilt position of the camera.
[Zoom] .. Set the viewing angle of the camera.
[BLC] (Back Light Compensation) - Select [OFF] or [ON] for the BLC setting of the camera.
[Focus Mode] - Select [Auto], [Manual], or [Fixed at infinity] for the focus mode of the camera.
[Smart Shade Control] - Select [OFF] or a level from [1] (Mild) to [7] (Strong) for the smart shade control setting of the camera.
[White Balance] - Set the white balance of the camera to [Auto] or according to the light source of the condition in which it is used.
[R Gain], [B Gain] - If white balance is set to [Manual], set the respective gains to a value between 0 and 1023.
(12) [Get camera info] - Load the current camera angle of the image display area, or the [Focus] and [Smart Shade Control] settings of Control for Admin, and reflect them in the panorama screen or camera parameter settings.
(13)
[Full Image] - Displays the full image obtained from the camera. A preset preview frame (yellow) reflecting the preset settings is shown. If you drag to resize or move the frame, the new frame is reflected in the preset settings.
(14)[Update Image] - Update the full image. Click this button to obtain an image at the current camera angle of view.
(15)[Show in viewers] checkbox - Select this checkbox to use presets in the viewer. When home position is selected in (8), this function is grayed out.
(16)Camera Parameters - Displays the values for the pan and tilt positions and zoom viewing angle in accordance with the size and position of the preset preview frame on [Full Image].
(17)[Get Digital PTZ Info] - Load the settings of the currently stored preset, and reflect them in the preset preview frame on [Full Image] and the camera parameters.
(18)[Preview settings] - Use the camera parameter values that are being edited to adjust the camera angle, or the [Focus] and [Smart Shade Control] settings of Control for Admin, and preview them in the image display area.
(19)[Clear settings] - Delete the settings for the preset selected.
(20)[Restore settings] - Clear the settings you have specified on the screen of the tool and restore the settings saved in the camera.
(21)[Save settings] - Save the edited preset settings in the camera. If presets have been set, be sure to save the settings by clicking [Save settings].
