Setting Focus and Exposure Compensation
Setting the Focus
Use manual operations to focus on a desired position or fix at infinity. In manual operations, you can use the oneshot AF function to focus on the subject
(far) and (near) buttons.
Clicking [One-shot AF] will use autofocus to focus on a subject and then return to manual focus.
[Fixed at Infinity]:
You can set the focus so that it is fixed near infinity.
Note
- One-shot AF may not focus properly on the following subjects.
Setting the Exposure
You can set any of nine levels of image brightness (-4 to +4).
To darken the image, drag the slider toward [Dark]. To brighten the image, drag the slider toward [Bright].
Note
• If the camera's Exposure Mode was set to [Manual], it will be changed to [Auto] after setting exposure compensation.
• The exposure compensation value set with the Camera Angle Setting Tool will be reset when the camera is rebooted. The value will not be reflected in [Exposure Compensation] of [Initial Camera Settings] in [Camera] in the Setting Page.