When the built-in memory becomes full, will the recording be automatically saved to the memory card, or vice versa (relay recording)? (VIXIA HF G20 / LEGRIA HF G25)
Article ID: ART138395 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 08/17/2015 |
Description
When the built-in memory becomes full, will the recording be automatically saved to the memory card, or vice versa (relay recording)? (VIXIA HF G20 / LEGRIA HF G25)
Solution
When the built-in memory becomes full, will the recording be automatically saved to the memory card, or vice versa (relay recording)? (VIXIA HF G20 / LEGRIA HF G25) ID : 8201093400 _ EN _ 1 |
Solution | You can activate relay recording so if the memory you are using becomes full while recording movies, the recording will continue automatically on a memory card. When recording in the built-in memory, you can choose to use only memory card A for relay recording ( ), or use memory cards ( ). When recording on memory card A, you can use memory card B for relay recording ( ). Confirm the following information regarding the relay recording settings. Insert a memory card that contains no video recordings into the card slot of the memory card you want to use for relay recording. - When relay recording from the built-in memory: memory card slot or memory card slots.
- When relay recording from memory card A: memory card slot only.
NOTE - You cannot use relay recording from the built-in memory to memory card B. When using a single memory card, be sure to insert it into memory card slot .
- During Story Creator mode, relay recording and double slot recording are not available.
1. Set the mode switch to <M> or <CINEMA>. 2. Turn on the camcorder. 3. Touch [ ]. 4. Touch [ ]. 5. Touch [ ]. 6. Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, and touch inside the frame on the right. 7. Touch [ ] or [ ]. 8. Touch [Relay Recording]. 9. Touch [ ] or [ ]. If [ ] was selected in Step 8, then you can only choose [ ]. 10. Touch [ ] to close the menu. NOTE - There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another.
- Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder. - Opening the double memory card slot cover. - Changing the position of the mode switch. - Changing the camcorders operating mode. - Changing the memory used for recording movies.
|