When the built-in memory becomes full, will the recording be automatically saved to the memory card, or vice versa (relay recording)? (VIXIA HF G20 / LEGRIA HF G25)
Article ID: ART138395 | Date published: 05/13/2015 | Date last updated: 08/17/2015
 

Description

When the built-in memory becomes full, will the recording be automatically saved to the memory card, or vice versa (relay recording)? (VIXIA HF G20 / LEGRIA HF G25)

Solution

You can activate relay recording so if the memory you are using becomes full while recording movies, the recording will continue automatically on a memory card.
When recording in the built-in memory, you can choose to use only memory card A for relay recording ( ), or use memory cards ( ). When recording on memory card A, you can use memory card B for relay recording ( ).
Confirm the following information regarding the relay recording settings.

Insert a memory card that contains no video recordings into the card slot of the memory card you want to use for relay recording.
  • When relay recording from the built-in memory: memory card slot or memory card slots.
  • When relay recording from memory card A: memory card slot only.
NOTE
  • You cannot use relay recording from the built-in memory to memory card B. When using a single memory card, be sure to insert it into memory card slot .
  • During Story Creator mode, relay recording and double slot recording are not available.

1. Set the mode switch to <M> or <CINEMA>.

2. Turn on the camcorder.

3. Touch [ ].

4. Touch [ ].

5. Touch [ ].

6. Drag your finger up and down bring [ Rec Media for Movies ] into the orange selection bar, and touch inside the frame on the right.

7. Touch [ ] or [ ].

8. Touch [Relay Recording].

9. Touch [ ] or [ ].
If [ ] was selected in Step 8, then you can only choose [ ].

10. Touch [ ] to close the menu.

NOTE
  • There will be a momentary stop in the scene at the point where the camcorder switches from one memory to another.
  • Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder.
- Opening the double memory card slot cover.
- Changing the position of the mode switch.
- Changing the camcorders operating mode.
- Changing the memory used for recording movies.

SIMS Doc Id

8201093400