Do I need to initialize memory cards? (VIXIA HF G20 / LEGRIA HF G25)
| Article ID: ART138453 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 08/17/2015 |
Description
Do I need to initialize memory cards? (VIXIA HF G20 / LEGRIA HF G25)
Solution
| Do I need to initialize memory cards? (VIXIA HF G20 / LEGRIA HF G25) ID : 8201098000 _ EN _ 1 |
| Solution | Initialize memory cards when you use them with this camcorder for the first time. You can also initialize a memory card or the built-in memory to permanently delete all the recordings it contains. At the time of purchase, the built-in memory comes preinitialized and contains music files for use as background music during playback. It also contains images used for the image mix function. CAUTION - Initializing the memory will permanently erase all recordings. Lost original recordings cannot be recovered. Make sure you save important recordings in advance using an external device.
- Initializing a memory card will permanently erase any music and image files you may have transferred to the card. (The music and image files that come pre-installed in the built-in memory will be restored after it is initialized.)
- At the time of purchase, Eye-Fi cards contain the necessary network configuration software. Be sure to install the software and complete the required configuration setup before you initialize the Eye-Fi card prior to using it with this camcorder.
1. Power the camcorder using the compact power adapter.
 IMPORTANT Do not disconnect the power source or turn off the camcorder until the initialization is completed.
2. Set the mode switch to <M> or <CINEMA>. 3. Turn on the camcorder. 4. Touch [  ].
 5. Touch [  ].
 6. Touch [  ].
 7.  Drag your finger up and down bring [ Initialize  /  ] into the orange selection bar,  and touch inside the frame on the right.
 8. Touch [Built-in Mem.], [Mem. Card A] or [Mem. Card B].
 9. Touch [Initialize].
 10. Touch [Yes] to start initialization.
 REFERENCE - Touch [Complete Initialization] this option if you want to physically erase all the data rather than just clear the file allocation table of the memory.
- If you selected the [Complete Initialization] option, you can touch [Cancel] to cancel the initialization while it is in progress. All recordings will be erased and the memory can be used without any problem.
11. Touch [OK].
 |
