IMPORTANT

The following explanations are provided based on the assumption that the [Shooting Mode] is set to [Program AE] (
).

• [Servo AF] is set to [On] and cannot be changed.
• Tracking may not be possible when subjects are too small or move too rapidly, or when subject color or brightness matches that of the background too closely.
• [AF-Point Zoom] on the [
  ] tab is not available.
• [Macro] (
  ) is not available.
• In order to use [Tracking AF] the camera must be set to one of the following modes:

-
,
,
,
,
,
,
,
,
,
,
,
,

2. Press the <
> button.

Press the <
><
> to select the [Shooting] (
) tab.

Press the <
><
> buttons or turn the <Control dial> to choose [AF Frame], and then press the <
><
> buttons to move right/left to select [Tracking AF].

After making the setting, press the <
> button.

5. Aim the camera so that [
] is on the desired subject, and then press the <
> button.

- When the subject is detected, the camera beeps and [
] is displayed. Even if the subject moves, the camera will continue to track the subject within a certain range.

- If no subject is detected, [
] is displayed.

REFERENCE

• To cancel tracking, press the <
  > button again.

6. Press the shutter button halfway. (
) changes to a blue (
) which follows the subject as the camera continues to adjust the focus and exposure (Servo AF).

- Even after your shot, [
] is still displayed and the camera continues to track the subject.

NOTE

• When shooting in [MF] mode, press and hold the <
  > button for at least one second.
• If [Face ID] is set to [On], names will not display when registered people are detected, but the names will be recorded in the still images. However, a name will display if the subject chosen to focus on is the same as a person detected with Face ID.