Part Names

Article ID: ART138530 | Date published: 05/13/2015 | Date last updated: 08/17/2015


Part Names


Part Names

1 Reset switch - Turn on the power while pushing this switch using a sharp object. Continue to push the switch for 5 seconds or more to restore all factory settings except for the date and time.

2 LED - The blue LED light comes on.

On: When powered on, during reboot

Off: During normal use

3 SD card slot

4 External device I/O terminals

5 Power connection terminal

6 Installation screw holes - Used when securing the camera to the installation surface, the junction box mounting kit (sold separately), or the recessed mounting kit (sold separately).

7 Wiring hole

8 Audio I/O terminal - Connect the included audio interface cable here to connect audio input and output devices to the camera.

9 100BT LAN connector

10 Cable clamps

11 Fan

12 Heater connection terminal


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments