You can use the supplied software, PIXELAs Transfer Utility or VideoBrowser, to save the movies recorded in the build-in memory or on an SD card ^*1 to a computer^*2
*1 Carefully read the information in Notes on SDXC Memory Cards .
*2: Windows Only. See System Requirements (VIXIA HF G20 / LEGRIA HF G25) .

NOTE

Install the supplied software (VideoBrowser) before you connect the camcorder to the computer for the first time. See Installing PIXELA VideoBrowser (VIXIA HF G20 / LEGRIA HF G25) .

2. Press <> to open the date index screen or gallery screen.

NOTE

Camcorder: Select [All (for PC only)].

• Camcorder: When the connection is successfully established, [USB Connection] appears on the screen.

IMPORTANT

• When the camcorder is connected to a computer:

- Do not open the double memory card slot cover and do not remove the memory cards.

- Do not access, change or delete any of the camcorders folders or files directly from the computer as this may result in permanent data loss. Always save your movies on the computer, and restore files to the camcorder, using only the supplied PIXELAs software.

• Observe the following precautions while the ACCESS indicator is on or flashing. Failing to do so may result in permanent data loss.

- Do not open the double memory card slot cover.

- Do not disconnect the USB cable.

- Do not turn off the camcorder or the computer.

- Do not change the camcorders operating mode.

• When restoring to the camcorder video files that were previously saved to the computer, do not disconnect the USB cable or turn off the camcorder or computer. Doing so may result in scenes that cannot be played back on the camcorder.
• Operation may not work correctly depending on the software and the specifications/settings of your computer.

NOTE

• Also, see the instruction manual of your computer.
• You can also choose to save complete stories from the gallery. In such case, all the scenes in the story will be merged and saved as a single video file.