Ask a Question

[Access Control] IPv4 Host Access Restrictions

Article ID: ART138929 | Date published: 05/13/2015 | Date last updated: 08/17/2015
 

Description

[Access Control] IPv4 Host Access Restrictions

Solution

[Access Control] IPv4 Host Access Restrictions

(1) [Apply Host Access Restrictions] - Set IPv4 host access restrictions to [Disable] or [Enable].

(2) [Default Policy] - If IPv4 host access restrictions are applied, select [Authorize Access] or [Prohibit Access] for the default policy.

(3) [Network Address / Subnet] - Create a list of permitted hosts and restricted hosts and set IPv4 address access for each host to [Yes] or [No]. You can specify the subnet and set access restrictions by network or host. If access is prohibited, access to all ports is restricted.

Important

  • To prohibit access via a proxy server in HTTP connection, a proxy server address must be set.

  • If host access restriction is set mistakenly, access to the setting pages themselves may be prohibited, in which case restoring the factory default settings will become the only means for recovery.

 


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments