REFERENCE
Displays during shooting (Onscreen Markers) You can display a grid or a horizontal line at the center of the screen. Use the markers as a reference to make sure your subject is framed correctly (vertically and/or horizontally). - Using the onscreen markers will not affect the recordings.
NOTE - The information displays or buttons cannot be hidden while the camcorder is shooting.
1. Set the mode switch to <M> or <CINEMA>.
 2. Turn on the camcorder and make sure it is set to a recording mode. 3. Touch [  ].
 4. Touch [  ].
 5.  Drag your finger up or down to bring [Onscreen Markers] into the orange selection bar, and then  touch the orange frame on the right.
 6. Drag your finger up or down to select an option.
 7. Touch [  ] to close the menu. 8. The level or grid set will appear on the screen.
 * If [Level (White)] was selected Display During Playback (Data Code) With every scene or photo recorded, the camcorder keeps a data code (date/time of recording, information about the camera setup, etc.). You can select the information to be displayed with the [Data Code] setting. 1. Turn on the camcorder. 2. Press <  > to set the camcorder to Playback mode. 3. Touch [ ].
 4. Drag your finger up or down to bring [Data Code] into the orange selection bar, and then touch the orange frame on the right
 5. Touch any of the available options.
 6. Touch [ ] to close the menu. 7. When the movie is played back, the data code will appear.
 * If [Date and Time] was selected NOTE The data code will appear when the screen is touched, regardless of the selected option.
| 