Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (iPF8400)
Article ID: ART139502 | Date published: 05/13/2015 | Date last updated: 08/17/2015
 

Description

Fine-Tuning the Paper Feed Amount (Adj. Fine Feed) (iPF8400)

Solution

If the contrast is uneven or banding in different colors appears at 50 mm (2.0 in) intervals in printed documents, try executing Adj. Fine Feed during printing to fine-tune the feed amount.
NOTE
  • The Adj. Fine Feed menu is only displayed during printing.
Additionally, it is displayed when you have selected Automatic or Print Quality in Adj. Priority in Feed Priority.
  • Always execute Adj. Quality before Adj. Fine Feed.
Once you execute Adj. Quality, the Adj. Fine Feed value will revert to 0.

Perform adjustment as follows.

1.On the Tab Selection screen of the Control Panel, press or to select the Settings/Adj. tab ().

NOTE
  • If the Tab Selection screen is not displayed, press the Menu button.

2.Press the OK button.
The Set./Adj. Menu is displayed.

3.Press or to select Adj. Fine Feed, and then press the OK button.

4.Press or to select a setting value in the range -5 to 5, and then press the OK button.
At this time, if banding in dark colors appears, select a setting value in the range 1 to 5, and if banding in light colors appears, select a setting value in the range -1 to -5.


SIMS Doc Id

8201721800