Configure the Recording Mode - Sensor Recording
1 Click [Sensor Recording] in the recording mode list and select the check box.
2 Configure the image and event settings.
(1) [Do not record] - Select to not record even when there is a signal from this sensor
Hint
You can individually enable or disable recording for each sensor. For example, you may not want to record when there is door sensor signal, but to start recording when there is a window sensor signal.
(2) [Start Recording] - Start recording when there is a signal from the sensor. After selecting the item, configure the recording settings below the item.
(3) [Priority] - Select the event priority. For details, see Ôƒheck EventsÔ¼/P>
(4) [Invert this event] - Start recording when there is no signal from the sensor, and stop recording when a signal is present The other settings are the same as those for continuous recording. For details, see Ôƒontinuous Recording SettingsÔ¼/P>
Important
When you select the [Sensor Recording] check box in the recording mode list in step 1, [Do not record] is selected for all of the sensors. You must select [Start Recording] for at least one sensor to be able to start sensor recording.
The sensor inputs can generate a large number of events for the Storage Server, thereby increasing the load on the server. For reference, if the Storage Server is continuously receiving more than 10 events per minute, we recommend that you use continuous recording mode.
If the recording period for a schedule ends while sensor recording is in progress, recording will stop.
Note
The number of tabs depends on the number of compatible external devices (sensors) that are connected to the camera.
The name of the external device that is registered in the camera is displayed in the [Sensor Name] box.
If two sensor recording schedules with the same priority are set, the schedule that is triggered first takes precedence. If the second schedule is still present when the first schedule ends, the second schedule will start recording.
