Long Document Mode Setting

 Using the Long Document mode, pages up to 3,000 mm (118.1") long can be scanned.
Changing the Long Document Mode setting can be done from the Control Panel.

Setting Long Document Modes on the Control Panel

1. Press the Menu key on the control panel.
    
   The User Mode is activated.
    
   
   
2. Press the key seven times to display Long Document Mode.
    
   
   
3. Confirm your settings.
   [ON2]: When the [Match original size] or [Scanner's Maximum] page size setting is selected, scanning document page lengths up to 3,000 mm (118.1") is enabled.
   [ON1]: When the [Match original size] or [Scanner's Maximum] page size setting is selected, scanning document page lengths up to 1,000 mm (39.4") is enabled.
   [OFF]: When the [Match original size] page size setting is selected, scanning document page lengths up to 432 mm (17.0") is enabled.
   
   
4. Press [Enter].
    
   The current setting is indicated by blinking square brackets [ ] .
   
   
5. Press the  or key and press [Enter] to accept the selection.
   
   
6. Press the Stop key to exit the User Mode.
   
    
   - Processing may be slowed when scanning in the Long Document Mode.
   - When Long Document Mode is set to [ON1] (1,000 mm), a scanned image may be lost if the scanning mode is set to color and the image quality is set to [Image quality priority]. In the event, scan the document in black and white or reduce the image quality.
   - When scanning using Long Document Mode, [High-Quality Moire Reduction], [Auto orientation compensation], or document orientation of [+90 degrees] or [-90 degrees] cannot be used.
   - If a sheet is loaded at a skewed angle when scanning long documents, it may be damaged by contacting sides of the transport path. So be careful to avoid loading documents at skewed angles.
   To feed each document page manually when scanning long documents, press the [Separation Off] key on the control panel.