View Restriction Setting Tool - Display Screen
(1) Image Display Area - The image currently captured by the camera is shown. Pan, tilt, and zoom operations are the same as in the VB-H41/610/710 Viewer. For details, see Ôˆow to Operate the ViewerÔ¼/P>
(2) [Switch Mouse Operation] button - Click the button to switch to . In this mode, move the mouse pointer to the image display area and click to operate the pan and tilt. Click the button again to return to .
(3) [Switch Screen Size] button - Each time this button is clicked, the screen size of the image display area switches between Ó´80 x 270Ô and Ó¹60 x 540Ô®
(4) [Obtain/Release Camera Control] button - This button is used to obtain/release the camera control privileges. For details, see Ô?btaining Camera Control PrivilegesÔ¼/P>
(5) [Control for Admin] button - Displays the Control for Admin Panel
(6) [Panorama Screen] - The panorama image registered in the camera is shown. View restriction preview frames, representing the view restriction setting values, are also shown. You can drag the frames to change their shapes, with the new settings being reflected in View Restriction Settings.
(6)-1 Pan/tilt preview frame (red frame) - Range of field of view defined by top/ bottom/left/right edges
(6)-2 Wide-angle preview frame (green frame) - Wide-angle restriction setting (restriction of capture frame)
(6)-3 Telephoto preview frame (yellow frame) - Telephoto restriction setting (restriction of maximum zoom ratio)
(7) [Digital Zoom] - The current digital zoom usage status of the camera is shown in real time.
(8) [Image Stabilizer] - The current image stabilizer usage status of the camera is shown in real time.
(9) [Apply the view restriction] - To use view restrictions, select this checkbox.
(10)View restriction setting entry boxes and [Get value] - You can enter a value in each view restriction setting entry box to change the applicable setting. You can load the values for the current camera angle to the view restriction settings by clicking [Get value].
[Upper Limit]: Top limit of the view restriction. Click [Get value] to load the top edge value of the current camera angle.
[Lower Limit]: Bottom limit of the view restriction. Click [Get value] to load the bottom edge value of the current camera angle.
[Left Limit]: Left limit of the view restriction. Click [Get value] to load the left edge value of the current camera angle.
[Right Limit]: Right limit of the view restriction. Click [Get value] to load the right edge value of the current camera angle.
[Telephoto]: Telephoto limit of the view restriction. Click [Get value] to load the zoom ratio of the current camera angle
[Wide-angle]: Wide-angle limit of the view restriction. Click [Get value] to load the zoom ratio of the current camera angle.
(11)[Display in panorama screen] - Apply the current view restriction settings to the panorama screen. At this point, the settings are not yet saved in the camera. Be sure to click [Save settings].
(12)[Restore settings] - Clear the settings you have specified on the screen of the tool and restore the settings saved in the camera.
(13)[Save settings] - Save the set view restriction in the camera. After the view restriction has been set, be sure to save the settings in the camera by clicking [Save settings
