Adding Transition Effects (Faders) to Scenes (VIXIA HF G20 / LEGRIA HF G25)
| Article ID: ART140039 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 08/17/2015 |
Description
Adding Transition Effects (Faders) to Scenes (VIXIA HF G20 / LEGRIA HF G25)
Solution
| Adding Transition Effects (Faders) to Scenes (VIXIA HF G20 / LEGRIA HF G25) ID : 8201777700 _ EN _ 1 |
| Solution | The camcorder offers two professional looking transition effects to fade-in or fade-out scenes. You have the option to activate the fader only one time or every time you start or stop recording. 1. Set the mode switch to <M> or <CINEMA>.
 2. Turn on the camcorder and make sure it is set to a recording mode. 3. Touch [  ].
 4.  Drag your finger up and down to display the rest of the panel, and then  touch [Faders].
 3. Touch any of the available options. Touch [  (Off)] to turn faders off.
 The different effects are as shown below. - Fade Trigger
 4. Touch [  ]. 5. Press <START/STOP> in record pause mode (  ) to start recording with a fade in. Press <START/STOP> while recording (  ) to fade out and pause the recording. NOTE - When you apply a fader, not only the picture but also the sound will fade in or out.
- Faders cannot be used in the following cases:
- While using the [Old Movies] cinema-look filter in  mode. - When recording scenes with decorations. - When recording video snapshot scenes. - While pre-recording is activated. - You can select whether to fade to/from a black screen or a white screen with the [Fader Setting] setting.
|
