Adding Transition Effects (Faders) to Scenes (VIXIA HF G20 / LEGRIA HF G25)

Article ID: ART140039 | Date published: 05/13/2015 | Date last updated: 08/17/2015


Adding Transition Effects (Faders) to Scenes (VIXIA HF G20 / LEGRIA HF G25)


The camcorder offers two professional looking transition effects to fade-in or fade-out scenes. You have the option to activate the fader only one time or every time you start or stop recording.

1. Set the mode switch to <M> or <CINEMA>.

2. Turn on the camcorder and make sure it is set to a recording mode.

3. Touch [ ].

4. Drag your finger up and down to display the rest of the panel, and then touch [Faders].

3. Touch any of the available options.
Touch [ (Off)] to turn faders off.

The different effects are as shown below.
  • Fade Trigger

  • Wipe

4. Touch [ ].

5. Press <START/STOP> in record pause mode () to start recording with a fade in. Press <START/STOP> while recording () to fade out and pause the recording.

  • When you apply a fader, not only the picture but also the sound will fade in or out.
  • Faders cannot be used in the following cases:
- While using the [Old Movies] cinema-look filter in mode.
- When recording scenes with decorations.
- When recording video snapshot scenes.
- While pre-recording is activated.
  • You can select whether to fade to/from a black screen or a white screen with the [Fader Setting] setting.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments