The procedure for connecting an external microphone is explained below. For more information on settings, refer to the Related information. Attaching the Handle Unit To use the INPUT 1/INPUT 2 terminals,, infrared light, and tally lamp, attach the HDU-1 handle unit to the camcorder. 1. Use the supplied screws to attach the microphone holder unit to the handle unit ( ). 2. ( ) Align the handle unit with the handle attachment unit and then ( ) slide the handle unit forward until it is in place. - Make sure the front and rear screws are raised when you slide the handle unit.
NOTE XA20: Make sure to turn the screws and remove the cover before using.
3. Firmly tighten the front and rear screws with a coin or similar object. Attach the external microphone 1. Loosen the microphone lock screw ( ), open the microphone holder and insert the microphone ( ). 2. Tighten the lock screw ( ) and put the microphone cable through the microphone cable clamp under the microphone holder ( ). 3. Plug the microphone cable into the desired INPUT terminal or the MIC terminal ( ). |