Article ID: ART141102 | | | Date published: 05/13/2015 | | | Date last updated: 08/17/2015 |
Description
Solution
Images are blurry or not in focus ID
:
8201743500
_
EN
_
3
|
||||||||||||||||||||||||
Solution |
When an image is blurry or cannot be brought into focus during shooting, please check the following.
1. Holding the Camera You can prevent camera shake by holding the camera firmly.
Keep your arms tight against your body while holding the camera firmly by the sides. Be sure that your fingers do not block the <flash>.
2. When the Camera Shake Icon Appears When you press the <Shutter Button> halfway in low light conditions where camera shake is likely, a flashing (
) will appear.
Press <
> button > [Shooting] ( ) tab > [IS Settings], and then select [Continuous] for the [IS Mode].
Press the <
> a few times to set the flash ( ) to [On].
Press the <FUNC./SET> (
) button, and < >< >< >< > to choose the [ISO speed] you want to set. For details on the setting screen that appears on your camera or the [Shooting Modes] in which the [ISO Speed] can be set, see the table at the end of the page.
Additionally, you should set the [IS Mode] to [Off] when shooting with a tripod.
3. Image is blurred
Half-press the <Shutter Button> (press lightly to focus), and then press it fully (without releasing the <Shutter Button>, press it all the way down).
Press the <
> button > [Shooting] tab ( ), and then select [On] for [AF-assist Beam].
Press the <Macro> (
) button several times to select a suitable [Focusing Range].
- Focus Lock
Change the composition while holding the <Shutter Button> down halfway.
- AF Lock
With the <Shutter Button> pressed halfway, press the <
> button. The focus is fixed and (
) appears. 4. The AF frame does not appear, and the camera does not focus If you center on the light and dark contrasting area of the subject and push the <Shutter Button> halfway, or repeatedly push the <Shutter Button> halfway, the [AF frame] will appear and the camera will focus.
5. Information on different models
|