Send a Fax With Your Printer - PIXMA MX922
Article ID: ART141605 | Date published: 05/13/2015 | Date last updated: 02/07/2020
 

Description

Learn how to fax with your PIXMA MX922 printer.

Solution

Here are the steps to send a fax using either:

  1. The automatic document feeder (ADF), or
  2. The glass surface on your printer.

 
1. Using the automatic document feeder (ADF)

  1. With the printer turned on, press the FAX button (1).

    figure showing where the FAX button is on the operation panel

  2. Open the ADF document tray (2) if you want to send multiple pages.

    showing how to open the ADF

  3. Insert the document into the ADF with the side to scan facing up (3) as shown in the image below.
    Note Double-sided documents cannot be automatically scanned and sent from the ADF. Use the glass scanning surface for duplex faxing.

  4. Adjust the document guides (4).

    showing the paper guides

  5. Use the Numeric buttons (5) to enter the fax number.

  6. Press the Black button (6), or press the Color button to send a color fax (recipient's fax machine must support color).

    showing the location of the Black button

  7. Your printer will start sending the fax.


2. Using the glass surface

You can also send faxes by placing documents on the glass scanning surface. This may be useful if your document is two-sided or too thick to run through the ADF.

  • In this case, press FAX, load your document face down on the glass surface, enter the recipient's fax number, and press the Black or Color button.

  • The Placing documents (platen) screen will appear after scanning each sheet of the document.

  • To send two or more pages, wait for the message to load the next page, then press the Color or Black button when your next page is ready to scan.

  • After scanning all pages, press the OK button to start sending.



Cancel redialing or fax transmission

To cancel manual redialing, press the Stop button. To cancel a fax transmission while it is in progress, press the Stop button, then follow the instructions on the LCD.

Note It may be possible that faxes will reach unintended recipients due to the misdialing or incorrect registration of fax/telephone numbers. When you send important documents, it is recommended that you send them after speaking on the telephone.


Adjusting the image quality settings

You can change the contrast and resolution of your fax transmission. Refer to Send a fax with non-default image resolution or contrast settings.


Related fax support