Set the fax receive mode on your MX922 printer / fax
Article ID: ART142267 | Date published: 05/13/2015 | Date last updated: 03/06/2019
 

Description

Learn how to set the fax receive mode.

Solution


About the receive modes

Set the receive mode to specify call and fax receive options if a line is used for both voice and fax calls.
  • Fax only - the machine receives the fax automatically.
  • DRPD (Distinctive Ring Pattern Detection) - the phone rings with a call and automatically receives the fax if the ring pattern is detected. If no ring pattern is detected, the phone continues to ring for the voice call.
  • Telephone priority - answer the phone normally and if it is a fax, hang up so the fax goes through to the machine.

Set the receive mode

  1. Turn on the machine.
  2. Press FAX.
  3. The fax standby screen is displayed. Press the center function button.
  4. The Receive mode settings screen is displayed. Use the UPDOWN buttons to select the receive mode, then press OK.
    • By pressing the right function button when a receive mode is selected, you can specify the advanced settings of each receive mode.
    • If DRPD is selected, the fax ring pattern can be selected on the DRPD: FAX ring pattern screen. 
  5. The fax standby screen is displayed

MX922 Page