| Solution | Recording Movies 
  | Control button [FUNC.]:
Open the FUNC. panel |  | Remaining recording time*3
 /  On the memory card
 /  Relay recording |  | Smart AUTO |  | Recording mode |  | Autofocus mode |  | Movie format |  |  Face detection;
 Autofocus only for faces
|  | Frame rate, recording mode and
movie format for dual recording*4 |  | Peaking |  | Audio peak limiter |  | Wi-Fi Remote function |  | Zebra pattern |  | Control button [PHOTO]: Take a photo |  | Conversion lens
(Wide attachment shown) |  | While recording/during playback:
Time code (hours : minutes : seconds : frames) |  | Recording command |  | Operation*1 |  | Face detection frame |  | Remote sensor off |  | Level marker |  | Pre-recording;
 Video snapshot length |  | Tracking frame |  | Image stabilizer |  | Audio level indicator
(INPUT terminals) |  | Frame rate |  | Linear PCM audio |  | Remaining battery time*2 |  | Audio channel |
*1  :Record,  :Record pause,  :Playback,  :Playback pause,  :Fast playback,  :Fast reverse playback,  :Slow playback/Slow reverse playback,  : Frame advance/Frame reverse. *2 The icon shows a rough estimate of the remaining charge as a percentage of the full charge of the battery pack. The remaining recording/playback time of the battery pack is displayed, in minutes, next to the icon. - When the battery charge becomes low,
 will appear in yellow. When the battery pack is exhausted,  will appear in red. Replace or charge the battery pack. - When you attach an empty battery pack, the power may turn off without displaying .
- Depending on the conditions under which the camcorder and the battery pack are used, the actual battery charge may not be indicated accurately.
- When the camcorder is off, press B to display the charge status of a battery pack. The Intelligent System will display the charge status (as a percentage) and the remaining recording time (in minutes) for 5 seconds. If the battery pack is exhausted, the battery information may not be displayed.
*3 When there is no more free space on a memory card, [ End] (memory card A) or [ End] (memory card B) will be displayed in red and the recording will stop. - During slow & fast motion recording mode, the shooting frame rate and playback frame rate will be displayed.
*4 When dual recording is activated, information for memory cards will be displayed.
 mode
 mode
  | Recording program
 Infrared mode
 Infrared light on/off |  | Audio scene select |  | Exposure compensation |  | External audio input from
the MIC terminal |  | AGC limit; Gain
(during the [Manual Exposure]
recording program) |  | Digital tele-converter |  | Manual focus |  | Microphone attenuator |  | Backlight correction |  | Audio level indicator
(built-in microphone/MIC terminal) |  | White balance |  | Aperture value |  | GPS |  | Shutter speed |  | Image effects |  | ND filter |  | Slow & fast motion recording
(shooting frame rate/playback frame rate) |  | Control button [FILTER 1]:
Cinema-look filters |  | Wind screen | |
|
Playing Movies (during playback)
  | Playback control buttons |  | Data code |  | Scene number |  | Volume controls |
Viewing Photos
  | Control button [MENU]:
Open the setup menus |  | Control button [  ]:
Return to the photo index screen |  | Current photo / Total number of photos |  | Control button [  ]:
Photo jump |  | File number |
|
|
NOTE You can press  to turn off most icons and displays.
|
