REFERENCE
Displays during shooting (Shooting Information) The information displayed changes each time you press the <DISP.> button. * The onscreen markers will be displayed only when [Onscreen Markers] is set to an option other than [Off]. Displays during shooting (Onscreen Markers) You can display a grid or a horizontal line at the center of the screen. Use the markers as a reference to make sure your subject is framed correctly (vertically and/or horizontally). - Using the onscreen markers will not affect the recordings.
1. Set the power switch to <CAMERA>. 2. Touch [ ]. 3. Touch [ ]. 4. Drag your finger up or down to bring [Onscreen Markers] into the orange selection bar, and then touch the button. 5. Drag your finger up or down to select an option. 6. Touch [ ] to close the menu. 7. The level or grid set will appear on the screen. * If [Level (Gray)] was selected Display During Playback (Data Code) With every scene or photo recorded, the camcorder keeps a data code (date/time of recording, information about the camera setup, etc.). You can select the information to be displayed with the [Data Code] setting. 1. Set the power switch to <MEDIA>. 2. Touch [ ]. 3. Drag your finger up or down to bring [Data Code] into the orange selection bar, and then touch the button. 4. Touch any of the available options. 5. Touch [ ]. 6. When the movie is played back, the data code will appear. * If [Date and Time] was selected NOTE The data code will appear when the screen is touched, regardless of the selected option.
|