Cleaning the Paper Feed Roller - MG7120

Article ID: ART142585 | Date published: 05/13/2015 | Date last updated: 04/19/2019
 

Description

This article explains how to clean the paper feed roller for the MG7120.

 

Solution

If the paper feed roller is dirty or paper powder is attached to it, paper may not be fed properly.

In this case, clean the paper feed roller. Cleaning will wear out the paper feed roller, so perform this only when necessary.

 

You need to prepare

For the cassette (upper): A single sheet of A4 or Letter-sized plain paper (to be cut for use)

For the cassette (lower): Three sheets of A4 or Letter-sized plain paper

(1) Flick the HOME screen, then tap Setup.

Using the Operation Panel

The setup menu screen will appear.

(2) Tap Maintenance.

The Maintenance screen will appear.

(3) Tap Roller cleaning.

Figure: Touch screen

The confirmation screen will appear.

(4) Tap Yes.

(5) Tap the paper source to clean (Cassette (upper) or Cassette (lower)).

(1) Follow the message to remove any paper from the paper source you selected in (5) of step 2.

(2) Tap OK.

The paper feed roller will rotate as it is cleaned.

  1. Make sure that the power is turned on.

  2. Select Roller cleaning.

  3. Clean the paper feed roller without paper.

  4. Clean the paper feed roller with paper.

(1) Make sure that the paper feed roller has stopped rotating, then follow the message to load plain paper as follows in the paper source you selected in (5) of step 2.

 

Loading paper in the cassette (upper):

Cut a single sheet of A4 or Letter-sized plain paper into four pieces.

Load them in the cassette (upper) with the top and bottom edges (A) towards the back side of the cassette (upper).

Loading paper in the cassette (lower):

Load three sheets of A4 or Letter-sized paper in the cassette (lower).

(2) Holding sides of the paper output tray, gently open it.

The output tray extension will open automatically when the paper output tray is opened.

(3) Extend the paper output support.

 Important

 If the inner cover is open, close it.

(4) Tap OK.

The machine starts cleaning. The cleaning will be complete when the paper is ejected.

(5) When the completion message appears, tap OK.

The screen will return to the Maintenance screen.

 Note

 Touch the HOME button to exit Setup and display the HOME screen.

 

For support and service options, sign into (or create) your Canon Account from the link below.
My Canon Account

 


MG7120 Page


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments