I want to select an AF frame before shooting (EOS 70D)
| Article ID: ART142737 |
| |
Date published: 05/13/2015 |
| |
Date last updated: 11/04/2015 |
Description
I want to select an AF frame before shooting (EOS 70D)
Solution
| I want to select an AF frame before shooting (EOS 70D) ID : 8201841500 _ EN _ 1 |
| Solution | NOTE Icons used on this page: <  >: AF point selection button / <  >: AF area selection button / <  >: Multi-controller / <  >: Main Dial / <  >: Quick Control Dial
You can manually select the AF point or zone. If 19-point automatic selection AF + AI Servo AF has been set, you can select any position where AI Servo AF is to start. 1. Set the cameras power switch to <ON>.  2. Set the lens focus mode switch to <AF>.  3. Turn the Mode Dial to a Creative Zone mode.  4. Press the < > or the < > button. The selected AF point will be displayed in the viewfinder and on the LCD panel. - In the Zone AF mode, the selected zone will be displayed.
 5. Select an AF point. - The AF point selection will change in the direction you tilt <
 >. If youpress < >, the center AF point (or center zone) will be selected. - You can also select a horizontal AF point by turning the <> dial and select a vertical AF point by turning the <> dial.
- In the Zone AF mode, turning the <> or <> dial will change the zone in a looping sequence.
  NOTE - When you hold down the <
 > button and turn the <> dial, you can select a vertical AF point. - When you press the <> or <> button, the LCD panel displays the following:
19-point automatic selection AF and Zone AF (manual zone selection):  1 pt AF (Manual selection):  (Center)/  (Off center) With  C.Fn II-10: Manual AF pt. selec. pattern], you can set either [Stops at AF area edges] or [Continuous]. For more information, please refer to [C.Fn II -10 Manual AF point selection pattern] in the camera`s instruction manual.
|
