Ask a Question

Printing the Network Information (LAN Details) - MX722

Article ID: ART142789 | Date published: 05/13/2015 | Date last updated: 03/21/2019
 

Description

This information explains how to print the Network Configuration Page (LAN Details) for the PIXMA MX722.  Note that while the example image attached to this article refers to the MX922, the steps listed are for the MX722.

Solution

Note: The steps listed below are specific to the MX722.  For instructions for other models, click here

  1. Make sure that the machine is turned on. Load a sheet of A4 or Letter-sized plain paper.

  2. Press the Menu button

  3. Select  Setup , then press the OK button.

  4. Select Device settings, then press the OK button.

  5. Use the UPDOWN button to select LAN settings, then press the OK button.

  6. Use the UPDOWN button to select Confirm LAN settings, then press the OK button.

  7. Use the UPDOWN button to select Print LAN details, then press the OK button to confirm the selection.

  8. Use the UPDOWN button to select Yes, then press the OK button to start printing.

    The machine starts printing the network setting information.

Attachment


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments