Print the LAN details (Network Information) - MX922

Article ID: ART142828 | Date published: 05/13/2015 | Date last updated: 03/21/2019


Learn how to print your network configuration details directly from your PIXMA MX922 operation panel. Includes information about your wireless network name (SSID) and IP addresses.


Note: The steps listed below are specific to the MX922.  For instructions for other models, click here


  1. Make sure the printer is turned on, and there's a sheet of A4 or Letter-sized paper loaded.
  2. Press the Menu button.
  3. Press the right arrow and the down arrow DOWN to select  Setup, then press OK.
  4. Select  Device settings, then press OK.
  5. Use the arrow buttons UPDOWN to select LAN settings, then press OK.
  6. Use the arrow buttons UPDOWN to select Confirm LAN settings, then press OK.
  7. Use the arrow buttons UPDOWN to select Print LAN details, then press OK.
  8. Use the arrow buttons UPDOWN to select Yes, then press OK to start printing.
  9. The printer prints a page containing your network configuration details. See document below for an example.


MX922 Page



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments