Ask a Question

Printing the Nozzle Check Pattern - MX522

Article ID: ART143239 | Date published: 05/13/2015 | Date last updated: 08/17/2015
 

Solution

  

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

 Note

 If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE cartridge whose ink is low.

Replacing a FINE Cartridge


You need to prepare: a sheet of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.

  2. Load a sheet of A4 or Letter-sized plain paper in the front tray.

  3. Open the output tray extension, open the paper output tray, then extend the paper output support.

  4. Print the nozzle check pattern.

    5. (1) Press the MENU button.

    (2) Select Setup, then press the OK button.

    LCD and Operation Panel

    The setup menu screen will appear.

    (3) Select Maintenance, then press the OK button.

    The Maintenance screen will appear.

    (4) Select Print nozzle check pattern, then press the OK button.

    Figure: LCD

    The confirmation screen will appear.

    (5) Select Yes, then press the OK button.

    The nozzle check pattern will be printed and two pattern confirmation screens will appear on the LCD.

  5. Examine the nozzle check pattern.


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments