Precaution

A power failure during the firmware writing operation may disable the camera.

• • Use a fully charged Battery Pack or dedicated AC Adapter Kit (Optional) for the firmware update.
  • Do not shut off the power during the firmware writing operation.
  • Do not open the card slot cover during the firmware writing operation.

Firmware Download

The new EOS 7D Firmware Version 2.0.3 is available for download at the Canon website.  Please click on the link below:

https://www.usa.canon.com/support/p/eos-7d#idReference=software-drivers

1. Select your Operating System and OS Version from the drop-down boxes, then click on [Firmware]. 
2. Click on the [EOS 7D Firmware Version 2.0.3], then click on [I Agree - Begin Download] on the next page. 
3. When the download is complete, extract the file and you should now have a firmware update ( .FIR ) file and "update-procedure-pdf" folder.

Firmware Update Procedures

In the following instructions, x.x.x. indicates either the current firmware version or the firmware version for the update.

Prepare the items required to update the firmware.

1. Camera body
2. Dedicated Battery Pack (The battery pack must be fully charged) or dedicated AC Adapter Kit (Optional)
3. CF card (64MB or more, 64GB or less)
4. Firmware update file (you can download it from Canon's Website.)

Create the firmware update file.

1. Download the zipped self-extracting file from Canon's Website.
2. Extract the downloaded file, and create the firmware update file.
   
   How to Extract the Firmware Update File
   
   Windows
   
   Right-click the zipped file, and then select [Extract All]. Select a destination folder to expand the file into, and then select [Extract].
   
   Macintosh
   
   The downloaded file will automatically self-extract, creating the firmware update file.
   
   In case the downloaded file does not automatically self-extract, double-click the downloaded file.
3. Check the size of the firmware update file.
   
   If the file size does not match, then download the firmware update file again.
   
   How to Confirm the File Size
   
   Windows
   
   Right-click the icon of the firmware update file and select the [Properties] command from the pop-up menu that appears.
   
   Macintosh
   
   Select the icon of the firmware update file, and then select the [Get Info] command from the [File] menu.
4. The name and size of the firmware update file can be checked on the Web site.

Copy the firmware update file to the CF card.

1. Insert a CF card that has been formatted in the Camera into the CF card reader.
2. Copy the firmware update file to the first window that appears when the CF card is opened (the root directory).
3. Remove the CF card from the card reader.
   
   *When removing the CF card, be sure to do so as described in the documentation for the computer or the card reader. *If the firmware update file is placed in subfolder of the CF card, the camera will not see it.
4. Rotate the Mode Dial to select <P> mode (or any mode other than Fully-Automatic Modes).
5. Insert the CF card with the firmware into the camera.
6. Turn the Power Switch <ON>, and then press the <MENU> button to display the menu.
7. Rotate the Main Dial and the Quick Control Dial to select the "Firmware Ver.x.x.x" item at the bottom of the "Set-up 3 (Yellow)", and then press the <SET> button.
8. The firmware update screen will appear.
   
   *If the firmware update screen does not appear on LCD monitor, the firmware update file may not have been properly copied to the CF card, so please try again starting from step (1).

Update the firmware.

1. The firmware update screen will appear on the camera's LCD monitor.
2. If you press the <SET> button, a confirmation screen will appear, so check the firmware update shown, rotate the Quick Control Dial to select [OK], and press the <SET> button again to start the firmware update.
3. A message that the firmware is updating will appear during the update.
4. When the update is completed, the message will appear on the camera's LCD monitor.
5. Complete the firmware update by pressing the <SET> button.
   
   The firmware update is now completed.
   
   When the firmware update operations are finished, turn the camera <OFF> and remove battery from the camera for at least two seconds. This will cause the new firmware to take effect after the battery has been reloaded and the camera is turned on.
   
   Format the CF card before using it again.

Verifying the firmware Version

1. Turn the Power Switch <ON>, and press the <MENU> button.
2. Rotate the Main Dial and the Quick Control Dial, and you will see the "Firmware Ver.X.X.X" at the end of the settings shown in "Set-up 3 (Yellow)".
3. This is the currently installed firmware version number.
   
   Note: Select P mode (or any mode other than Fully-Automatic Modes). The version of the firmware will not appear in the Fully-Automatic Modes.

If an ERROR message appears during the firmware update

If an error message appears, remove the battery and check to make sure that there are no problems with the battery capacity or with the firmware update file on the CF card.

If there are no problems, repeat the update operations again.

If the problem persists, please contact the Canon Customer Support Center in your region.